Posted on

The Prisoners The Ants and The Cube of Sugar

2 prisoners were put inside a prison with nothing but a cube of sugar each and a plate

they were to be there for 1 month

 

Image result for prisoner

the first prisoner decided to eat 1percent of the sugar everyday and kept the rest in his pocket

the second prisoner decided to put the whole cube on his plate everyday on the open floor
and eat all the ants that walked into the plate and by doing so saving his sugar

after 1month who do you think will be alive ?

 

your answer below

Posted on

5 Things You Should Know About The Legendary King Sunny Ade As He Clocks 72 Years Today

5 Things You Should Know About The Legendary King Sunny Ade As He Clocks 72 Years Today

   

Chief Sunday Adeniyi Adegeye popularly known as King Sunny Ade or KSA is a veteran Nigerian singer, songwriter and multi-instrumentalist.

The Osogbo born juju artiste has over 100 songs to his credit with a career spanning over 4 decades.

KSA is one of Africa’s most influential artistes and one of the first to gain international prominence.

Here are 5 things you didn’t know about the legend as he turns 72 today –

1. He started touring America and Europe in the ’70s.

2. His 1983 album ‘Syncro System’ earned him his first Grammy award nomination in the ethnic/traditional folk recording category, making him the first Nigerian Grammy award nominee.

3. His journey to Hollywood stared in the 1980s. His music was featured in the 1983 film ‘Breathless’ and the 1986 comedy ‘One More Saturday Night’while he starred in the 1987 comedy, ‘O.C and Stiggs’.

4. In December 2016, he was inducted into the Hard Rock Cafe hall of fame

5. He is a visiting lecturer at Obafemi Awolowo University, Ile Ife.

Posted on

The JLO Boot By Jennifer Lopez From Versace Lets Design Yours !

These boots were made for…talkin’!

Jennifer Lopez hit the town Tuesday in N.Y.C. wearing a pair of slouchy denim Versace boots from the Italian label’s Resort 2019 collection — and they’re a hot topic on Twitter.

The over-the-knee boots imitate the style of a pair of jeans, with pockets on the back side, loopholes at the top and a black belt slipped through them.

Splash News

Kevin Mazur/Getty
Proving she’s still Jenny from the Block, Lopez, 49, completed the look with an oversize white button up shirtdress, hoop earrings and a nameplate necklace that read, “JENNIFER” around her neck. But it was the star’s choice of footwear that got the most attention.

Looking for more style content? Click here to subscribe to the PeopleStyle Newsletter for amazing shopping discounts, can’t-live-without beauty products and more.

“😂 did her jeans fall down,” one fan tweeted, implying that Lopez’s pantless look was a result of her denim footwear.

Play Video
Another Twitter user agreed, writing, “i thought they were pants.”

VERSACE

@Versace
· 31 Jul
#JenniferLopez wearing a pair of denim boots from the #VersaceResort19 collection.

hannah 50
@chambieselijah
i thought they were pants pic.twitter.com/wM852WizA6

10:22 PM – Jul 31, 2018
View image on Twitter
145
See hannah 50’s other Tweets
Twitter Ads info and privacy
“I swore I thought her pants fell off. That’s what happens when I don’t have my glasses,” one person tweeted. Someone else wrote, “Glasses or no glasses; the belts lined up too perfectly in the first pic to not think she was losing her pants.”

RELATED PHOTOS: UPDATED! Jennifer Lopez, Kendall Jenner, Plus More Stars in Sizzling Swimwear

Monica Whitehead 😘
@ThatgirlMonica2
· 31 Jul
Replying to @Versace @JLo
I swore I thought her pants fell off. That’s what happens when I don’t have my glasses.

Danny Mickens
@aGOATnamedDanny
Glasses or no glasses; the belts lined up too perfectly in the first pic to not think she was losing her pants

Despite some people’s confusion about the boots, many of J.Lo’s loyal fans had her back. “Only @JLo can have her pants fall down and magically turn into denim @Versace boots! #stylingandprofiling 🤩🤩✨✨,” one person said.

C-Ris🏅
@thinnchrispy
Only @JLo can have her pants fall down and magically turn into denim @Versace boots! #stylingandprofiling 🤩🤩✨✨

VERSACE

@Versace
#JenniferLopez wearing a pair of denim boots from the #VersaceResort19 collection. #VersaceCelebrities http://Versace.com

View image on TwitterView image on Twitter
4:38 AM – Aug 1, 2018
3
See C-Ris🏅’s other Tweets
Twitter Ads info and privacy

During Lopez’s outing, the singer stopped by MTV Studios where she was announced as the Michael Jackson Video Vanguard Reward recipient at 2018 MTV Video Music Awards.

As a Video Vanguard recipient, Lopez will follow in the footsteps of past honorees including Britney Spears, Justin Timberlake, Kanye West, Rihanna and Pink.

MTV/TRL/Getty
On NBC’s Today show, Lopez’s boyfriend Alex Rodriguez revealed what her reaction was like when she learned the big news.

“Jennifer doesn’t normally get excited much…but this is one time where I saw her get choked up. It was such an emotional, such a great deal, to celebrate over 25 years in her career,” he said. “And the fact that it’s named after Michael Jackson, someone who she idolizes, she’s super excited.”

Posted on

Saraki Sister Gbemi – I remain with Buhari,8 IndianMen Rape Pregnant Goat toDeath,Isha Sesay Decamps

 SHOPS & SHOPPING  AUCTIONS DEALS AND MORE 

The 9jabook Tweeterest DIGITAL  Newsletter Reloaded

9jabook is Now in Ibadan !  http://ibadan.online/

POSTS SENT AUTOMATICALLY TO SOCIAL MEDIA FACEBOOK TWITTER INSTAGRAM !

UNSUBSCRIBE Go To Bottom of This Email
Tweeterest Canada Launch Canadian Nigerian http://canadian.com.ng/

America Launches http://tweeterest.us

Our Top Sites Nairalaw:http://nairalaw.com Financial & Political News..Gloworld: Magazine & Downloads http://glo.world

Twixel Club & Artngine: Models Photos & Design.. http://artng.com.ng Drupp: Lets Ride  http://drop.com.ng..Tech http://systemini.net..Food..  http://isiewu.com.ng  Health..  http://wellr.space  Funding : http://payys.us

Edobook

eNGsearch http://engine.com.ng
VIDIOO !  http://vidio.com.ng
SPORTS FOOTBALL http://playplay.com.ng

LATEST NEWS

SARAKI vs SARAKI Brother & Sister At War

Pregnant Goat Gang Raped by 8 men in India

Image result for Leif Coorlim

RETWTRS

 SHOPS & SHOPPING  AUCTIONS DEALS AND MORE 

The 9jabook Tweeterest DIGITAL  Newsletter Reloaded

9jabook is Now in Ibadan !  http://ibadan.online/

POSTS SENT AUTOMATICALLY TO SOCIAL MEDIA FACEBOOK TWITTER INSTAGRAM !

UNSUBSCRIBE Go To Bottom of This Email
Tweeterest Canada Launch Canadian Nigerian http://canadian.com.ng/

America Launches http://tweeterest.us

Our Top Sites Nairalaw:http://nairalaw.com Financial & Political News..Gloworld: Magazine & Downloads http://glo.world

Twixel Club & Artngine: Models Photos & Design.. http://artng.com.ng Drupp: Lets Ride  http://drop.com.ng..Tech http://systemini.net..Food..  http://isiewu.com.ng  Health..  http://wellr.space  Funding : http://payys.us

Edobook

eNGsearch http://engine.com.ng
VIDIOO !  http://vidio.com.ng
SPORTS FOOTBALL http://playplay.com.ng

Posted on

10 Best Cheap and Affordable 3D Printers of 2018

In the past, it was impossible to get a 3D printer for under $500. Times have changed. Now, there are dozens of cheap 3D printers lining up for your attention. But not all of them are worth a second look. We’re here to show you which products are worth your time and money.

BUDGET
Best-budget-Cheap-3D-Printers-for-Home-Use
Monoprice Select Mini
4.4/5.0
9.9 lb
Wi-Fi, USB, SD card
Relatively fast printing speed and highly upgradeable.
Check Amazon 
BEST VALUE
Best-value-Cheap-3D-Printers-for-Home-Use
Monoprice Maker Select
4.7/5.0
20 lb
USB, SD card
Excellent long-term value and highly upgradeable.
Check Amazon 
TOP PICK
Top-value-Cheap-3D-Printers-for-Home-Use
Creality CR-10
4.7/5.0
22.7 lb
USB, SD card
Good printing speed and large build volume.
Check Amazon 

In this guide, we will provide you with detailed information about the best 3D printers under $500 for home use. There are a lot of affordable options here, ranging from fully enclosed 3D printers that can print both ABS and PLA to an open-framed 3D printer with a massive build volume. All the products listed here are either fully assembled out of the box or come in a semi-assembled package – no full DIY kits. We show you the cheapest 3D printers with the best features.

10 Best Cheap 3D Printers for Home Use Comparison Table

Make and Model Weight Connectivity Price
Creality CR-10 22.7 lb USB, SD card Check Price
Monoprice Select Mini 9.9 lb Wi-Fi, USB, SD card Check Price
Monoprice Maker Select 20 lb USB, SD card Check Price
Printrbot Play 1505 15.9 lb USD, SD card Check Price
M3D Micro+ 2.4 lb USB Check Price
XYZprinting da Vinci 1.0 Pro 48.5 lb Wi-Fi, USB Check Price
Qidi Tech X-one2 41.9 lb USB, SD card Check Price
XYZprinting da Vinci Jr. 2.0 Mix 28.7 lb Wi-Fi, USB, SD card Check Price
Instone Inventor Pro 26.5 lb Wi-Fi, USB, SD card Check Price
Robo 3D R1 Plus 21 lb USB, SD card Check Price

1. Creality CR-10

Creality CR-10View on Amazon

Editor’s Rating: 4.7/5

In a market full of cheap 3D printers with limited build sizes, the Creality CR-10 stands out. It’s a robust 3D printer with an enormous build volume, putting to shame many high-end 3D printers worth triple the price. If you want a cheap 3D printer that doesn’t have a stingy size limit on what you can print, the CR-10 should be at the top of your list.

The CR-10 is being marketed as a DIY 3D printer, which can be a turn-off for beginners and non-techies. But don’t worry, the assembly is not as bad as you think. It’s actually pretty easy to put together compared to other DIY 3D printers. It arrives halfway assembled instead of completely disassembled, so all you need to do is attach all the parts together and you’re good to go. It should take you about one hour to assemble the machine.

After the assembly, the next step is calibration, which can be really tricky. Make sure you don’t go in blind and tinker with the settings and the bed leveling without a plan. Forget about the included instruction manual – it’s useless. Instead, head straight to online forums and user groups and read about how to calibrate your printer properly.

Once you manage to get the CR-10 up and running, it has the potential to be one of the best cheap 3D printers under $1,000 – a price range dominated by the Prusa i3 series (the real ones from Prusa Research). It’s a total workhorse that can produce consistent results with minimal issues, assuming everything is configured the right way. It’s got fantastic print quality, prints relatively fast compared to other products in the same price range, and is easy to maintain. And have we mentioned it’s got an enormous build volume?

Since the CR-10 includes a heated print bed, you can work with ABS filament and other more advanced materials. However, in order to make that happen, you need to put in some effort, which involves tinkering with printing settings and even modding your machine. If you’re new to 3D printing, we recommend sticking to PLA and holding off on the experimentation until you have a full grasp on how 3D printing works.

Regarding software, the CR-10 comes with an outdated 3D printing software, so make sure you download the software update before playing around with your machine. If you don’t like the included printing software, you can always get a different one. Speaking of outdated features, the separate control box makes the Creality CR-10 look rather primitive. It’s bulky and is operated by a small knob. Well, at least it’s easy to use, so you won’t have too much trouble navigating the LCD interface.

If you want a large 3D printer but don’t want to spend more than $500, the Creality CR-10 is the best product available on the market. It’s easy to assemble, produces consistent results, and offers excellent long-term value.

amazon

Tech Specs
Resolution: 50 microns
Volume: 11.8 x 11.8 x 15.7 in
Filament: 1.75 mm
Type: ABS, PLA, HIPS, and others
Weight: 22.7 lb
Connect: USB, SD card
The Pros
 Massive build volume
 Easy to assemble
 Fantastic print quality
 Relatively fast printing speed
 Includes heated print bed
 Responsive LCD interface
 Large community
 Highly upgradeable
The Cons
 Not enclosed
 Needs modifications to print non-PLA filaments
 Useless instruction manual

2. Monoprice Select Mini

Monoprice Select MiniView on Amazon

Editor’s Rating: 4.4/5

The Monoprice Select Mini is a ridiculously cheap 3D printer, going for around $200 or less at most online stores. But unlike most other products in that price range, it can produce surprisingly good results, making it one of the best cheap 3D printers on the market.

The Select Mini rolls out in an assembled package out of the box and comes with a compact profile and a small footprint. It requires minimal tinkering on the hardware side before it can start its first print – although the manual print bed calibration process can be time-consuming, especially for beginners. The print bed is heated, making the Select Mini capable of printing with high-temperature materials such as ABS.

For onboard controls, the Select Mini comes with a knob-operated LCD interface. There’s nothing special about the LCD interface, so don’t expect anything other than the usual print settings and statistics seen on other similar interfaces. Though limited, the LCD interface gets the job done most of the time with minimal input issues.

Out of the box, the Select Mini is limited to PLA. In order to print with more advanced materials, some modifications are needed. For one, the print head needs to be replaced with a print head designed for high-temperature performance. Also, the print bed can use an upgrade for better adhesion and more consistent heat distribution.

But even with upgrades, there’s still one thing that puts a limit on what you can print with the Select Mini: a small build size. In the beginning, this limitation is not a big deal. There are still a lot of objects you can print even with a limited build volume. But at some point, as you level up from a complete beginner to an intermediate user, the need for a larger space will come knocking at your door.

The Select Mini is a highly recommended cheap 3D printer for beginners and an ideal secondary 3D printer for intermediate home users. It has obvious limitations, but with the right configurations and some mods, it can be a reliable workhorse, producing 3D models with impressive print quality.

amazon

Tech Specs
Resolution: 100 microns
Volume: 4.7 x 4.7 x 4.7 in
Filament: 1.75 mm
Type: ABS, PLA, TPU, and others
Weight: 9.9 lb
Connect: Wi-Fi, USB, SD card
The Pros
 Fully assembled
 Easy to set up
 Large community
 Good print quality
 Heated print bed
 Compact and lightweight design
 Easy to upgrade
 Can print with different materials
The Cons
 Small build volume
 Non-enclosed
 Slow print speed
 Unreliable customer support

3. Monoprice Maker Select

Monoprice Maker SelectView on Amazon

Editor’s Rating: 4.7/5

The Monoprice Maker Select is a budget 3D printer based on the popular Prusa i3 design, offering a much larger build volume than the Monoprice Select Mini. Though it has a different design, the things the Maker Select brings to the table is similar to its more compact kin.

The Maker Select is an open-framed 3D printer housed in a sturdy frame with an all-black finish, making it a lot more appealing than other Prusa clones on the market. It comes with a separate control box. The spool holder is installed at the top of the frame, as seen on the Original Prusa i3 MK2S.

This cheap 3D printer comes out of the box mostly assembled and ready to go in less than one hour. Outside of putting the frames together, there’s no major assembly required at the onset. However, the Maker Select, in its default form, is not the most reliable nor the safest – it needs mods right off the bat, starting with a MOSFET mod.

It’s easy to find help on how to get the Maker Select off to a good start. In addition to videos on the internet, there’s a huge community dedicated to the popular budget 3D printer that you can turn to for help. Just ask around which mods are crucial in the beginning.

The Maker Select comes with a set of familiar features. It has a heated print bed and an LCD interface for onboard controls and standalone printing via SD card. The heated print bed is one of the key components when printing with high-temperature materials. But don’t jump straight to advanced materials out of the box – the Maker Select requires mods before it can produce good results with non-PLA materials.

The Maker Select is a recommended 3D printer for tinkerers. It’s the kind of product that should be judged based on its long-term value rather than immediate impact. If you want a cheap 3D printer that can run alongside you as you go through the ups and downs of 3D printing, the Maker Select is a solid choice.

amazon

Tech Specs
Resolution: 100 microns
Volume: 7.9 x 7.9 x 7.1 in
Filament: 1.75 mm
Type: ABS, PLA, TPU, and others
Weight: 20 lb
Connect: USB, SD card
The Pros
 Excellent long-term value
 Semi-assembled
 Easy to set up
 Large build volume
 Highly upgradeable
 Heated print bed
 Large community
 Sturdy frame
 Open filament system
The Cons
 Open frame
 Needs mods out of the box
 Unreliable customer support

4. Printrbot Play 1505

Printrbot Play 1505View on Amazon

Editor’s Rating: 4.2/5

Printrbot is one of the few success stories on Kickstarter, with the original Printrbot ending up as one of the most funded projects in the 3D printing category. Since the original Printrbot’s launch in 2011, the US-based company has continued to produce affordable, high-resolution 3D printers, with the Printrbot Play 1505 being the cheapest in the lineup.

Take note that the product listed here is the older version of the Play 1505. The more recent model, the Play v2, retails for $500, with the pre-assembled package going for $600. On the other hand, the pre-assembled package of the older Play 1505 retails for just $300. That’s a significant price difference.

Make no mistake, the older version of the Play 1505 is still a very capable 3D printer that can easily outgun other products in the same price range. It is housed in a clean, professional-looking metal frame that sets it apart from the competition. The frame is robust and well-designed.

This cheap 3D printer was designed with beginners in mind. It’s easy to use and does not need a lot of maintenance after prints. Printrbot, however, dropped the ball on the filament loading system. The Play 1505 comes with a covered print head for safety. But the unintended consequence of the covered setup is that it makes loading the filament difficult. It’s not a deal-breaker, but it can be annoying in the beginning.

The Play 1505 lives up to the Printrbot reputation. It’s capable of producing high-resolution 3D models with a level of smoothness and precision that seems impossible for a budget 3D printer. It prints relatively fast, too, which is another plus. The bad news is there’s not enough space to accommodate more complex 3D models – the Play 1505 is one of the smallest 3D printers on this list.

In all, the Play 1505 is a budget 3D printer that brings real quality to the table, but with limitations. It lacks the versatility to print with different types of materials and the necessary build volume for larger 3D modes. But in return, it comes with an excellent print quality.

amazon

Tech Specs
Resolution: 50 microns
Volume: 4 x 4 x 5 in
Filament: 1.75 mm
Type: PLA, Flexible
Weight: 15.9 lb
Connect: USD, SD card
The Pros
 Pre-assembled
 Easy to use
 Sturdy metal frame
 Compact design
 Excellent print quality
 Relatively fast print speed
 Covered print head
The Cons
 Small build volume
 No heated build plate
 Loading the filament can be difficult

5. M3D Micro+

M3D Micro+View on Amazon

Editor’s Rating: 4.3/5

A product of M3D, the Micro+ is the improved version of the Micro, one of the most notable 3D printers with Kickstarter origins. It offers the same minimalist design that has made its predecessor a popular choice among consumers.

The Micro+ is a compact and lightweight desktop 3D printer available in different colors, including orange, blue, and black. Much like the original Micro, it comes out of the box with an almost plug-and-play setup. It is fully assembled and requires minimal tinkering during the initial setup. It has an automatic bed leveling technology, turning the usual hardware calibration process into a trivial matter.

In appearance, the Micro+ is barely distinguishable from the original Micro. It has that familiar semi-enclosed, plastic-made frame, with the spool holder sitting under the removable print bed. Though it adds to the minimalist design of the Micro+, the internal spool holder is not compatible with most third-party spools. An external spool holder is necessary for most brands.

There are a number of reasons the Micro+ is not an ideal primary 3D printer for tinkerers and intermediate users. First, it has no heated print bed in its vanilla form. The manufacturer sells the heated printed as an add-on for $100. Second, the M3D software, though easy to use, offers very limited print settings. But for beginners, the default software should be enough.

The most notable limitation of the Micro+ is its small build volume. It’s not much of an improvement over the original Micro in that department. Then again, the product is called “Micro,” so there’s no reason for customers to expect a large build volume in the first place. Since the Micro+ adopts a minimalist design, it lacks an onboard interface on its small frame as well.

Manufactured in the US, the Micro+ is a capable 3D printer for home use. It can produce quality prints out of the box, although the print speed is unflattering, even with some tweaks. M3D also offers lots of parts for the Micro+, as well as a reliable customer service.

amazon

Tech Specs
Resolution: 50 microns
Volume: 4.3 x 4.5 x 4.6 in
Filament: 1.75 mm
Type: ABS, PLA, HIPS, and others
Weight: 2.4 lb
Connect: USB
The Pros
 Fully assembled
 Extremely easy to set up
 Compact and minimalist design
 Good print quality for a cheap 3D printer
 Removable print bed
 Automatic bed leveling technology
 Good customer support
 M3D sells extra parts and add-ons
 Available in different colors
The Cons
 Small build volume
 Plastic frame
 No onboard interface
 Limited default software
 No heated print bed

6. XYZprinting da Vinci 1.0 Pro

XYZprinting da Vinci 1.0 ProView on Amazon

Editor’s Rating: 4.5/5

A fully enclosed 3D printer with a large build volume and a wireless option, the XYZprinting da Vinci 1.0 Pro was a finalist for our Best Pick. In the end, it lost out to the Creality CR-10, which brings better print quality and more value in the long run.

Designed for both beginners and hobbyists, the da Vinci 1.0 Pro is a well-built 3D printer that arrives assembled. But like most other pre-assembled 3D printers, it’s not exactly a 100 percent plug-and-play machine because you will still need to go through the initial setup. Expect to spend about 30 minutes to one hour in the calibration and software setup, depending on your technical skills. Once you get the initial setup out of the way, everything else is straightforward.

Most notably, the da Vinci 1.0 Pro features an open filament system, which means you can use filaments from third-party companies like Hatchbox, one of the most popular on the market. With the open filament system, you are no longer required to buy expensive proprietary filaments. If you’re a serious hobbyist who prints non-stop, this should be good news for you. But it’s worth noting that the da Vinci 1.0 Pro lacks a spool holder for a third-party filament. It’s not really a deal-breaker since you can easily print a spool holder for your first project.

Unlike other cheap 3D printers, the da Vinci 1.0 Pro can print both ABS and PLA – the most common materials – in a reliable and accurate manner. In both cases, the print quality is impressive. It’s definitely better than some 3D printers in the $600-700 range, but still not comparable to high-end $1000 machines. In terms of build volume, the da Vinci 1.0 Pro is a lot more generous than other products available for the same price, not counting open-framed DIY 3D printers.

For onboard controls, this 3D printer features a small LCD interface operated by a few buttons. It’s a straightforward interface that includes the basic operations you need for printing and calibration. It looks outdated, but it’s better than nothing.

In the software department, the da Vinci 1.0 Pro is kind of a mixed bag. On one end, the default software is user-friendly. It isn’t too complicated or confusing, which makes navigation easy for non-techies. But on the other end, it feels too simple and limited. If you can afford it and are willing to play around with mods, we recommend you switch to Simplify3D.

Although it’s not the cheapest, the da Vinci 1.0 Pro is an excellent 3D printer that gets the job done in a reliable manner. It’s got a wireless connectivity that actually works, a heated print bed, and an open filament system. For just $500, you get a fully enclosed 3D printer that brings real quality to the table.

amazon

Tech Specs
Resolution: 20 microns
Volume: 7.9 x 7.9 x 7.9 in
Filament: 1.75 mm
Type: ABS, PLA
Weight: 48.5 lb
Connect: Wi-Fi, USB
The Pros
 Fully enclosed
 Arrives pre-assembled
 Easy initial setup and calibration
 Large build volume
 Supports third-party filaments
 Heated build plate
 Includes wireless connectivity
 Integrated interior lighting
The Cons
 Lacks spool holder for third-party filaments
 Unreliable customer service
 Limited default software

7. Qidi Tech X-one2

Qidi Tech X-one2View on Amazon

Editor’s Rating: 4.6/5

The Qidi Tech X-one2 is one of the sturdiest budget 3D printers on the market, boasting a rigid frame that embarrasses 3D printers with an all-plastic enclosure. Compared to the pair of XYZprinting 3D printers listed here, the X-one2 is a tank.

Just like other enclosed 3D printers, the X-one2 is fully assembled out of the box, making it a perfect 3D printer for beginners. It has acrylic windows on the sides for easy monitoring of the print progress and a removable acrylic door out front. Instead of inside the frame, the spool holder is installed at the back of the machine, with the filament coming in from the top.

The X-one2 comes with a touchscreen interface, located at the base, and a heated print bed – both are uncommon features for an enclosed 3D printer under $500. The touchscreen interface is a step up from the usual knob-operated LCD interface while the heated print bed, in conjunction with the enclosed setup, means it’s possible to print with ABS, a high-temperature material.

The X-one2 is one of those cheap 3D printers that give you more than what you pay for. The print quality is impressive and the consistency between prints is remarkable. Once dialed in with the right settings, the X-one2 is a total workhorse that can run for days with minimal issues. It can also print with ABS in a reliable manner.

On the flip side, the X-one2 has a limited build volume, so complex 3D models that need more space are off the menu. Since there’s no way to upgrade the build volume, you’re stuck with that limited space. Enclosed 3D printers are not as open to modifications as open-framed 3D printers. Therefore, this 3D printer might not be the most ideal product for hardcore tinkerers.

The X-one2 is an excellent 3D printer for home use. It’s easy to use and prints really well. In addition, the full enclosure not only keeps curious hands (read: kids) safe from the moving parts but also helps keep plastic fumes in check. Qidi Tech is also notable for having a top-class customer service, so the Chinese company has you covered in case you need technical support.

amazon

Tech Specs
Resolution: 100 microns
Volume: 5.5 x 5.5 x 5.5 in
Filament: 1.75 mm
Type: ABS, PLA
Weight: 41.9 lb
Connect: USB, SD card
The Pros
 Fully assembled
 Rigid frame
 Easy to set up
 Good print quality
 Full enclosure
 Open filament system
 Touchscreen interface
 Heated print bed
 Outstanding customer service
The Cons
 Limited build size
 Slow print speed
 Noisy fans

8. XYZprinting da Vinci Jr. 2.0 Mix

XYZprinting da Vinci Jr. 2.0 MixView on Amazon

Editor’s Rating: 4.4/5

If you want to experiment with two-color 3D printing, you need a 3D printer with dual extruders. The bad news is that good 3D printers with dual extruders don’t come cheap, so they’re usually off the table if you want to stick to a low budget. The good news is that there’s an excellent alternative: the da Vinci Jr. 2.0 Mix.

Created by XYZprinting, the da Vinci Jr. 2.0 Mix is a 3D printer that comes with a dual-feeding single extruder, which means it can process two different filaments at the same time. Using the XYZprinting software, you can print in “mixer mode” and in “multicolor mode.”

Mixer mode is exactly what it sounds like. It allows you to mix two filaments to produce a sort of gradient effect on the printed item. For example, if you printed with a red filament and a yellow filament, you will get an item with a mix of red, yellow, and orange. Multicolor mode is basically like dual-extruder 3D printing in which the resulting item has two separate sections filled with different colors. It’s easy to play around with the two modes, courtesy of the user-friendly XYZprinting software.

Designed for both home use and classroom use, the da Vinci Jr. 2.0 Mix is a fully enclosed 3D printer that arrives assembled. It’s easy to set up and calibrate, with the bed leveling assist making a huge contribution in expediting the process. All in all, expect to go from unboxing to printing in about 45 minutes, maybe 1 hour if you’re not particularly gifted with electronics.

Performance-wise, the da Vinci Jr. 2.0 Mix comes with both positives and negatives. On the bright side, the print quality is really good for a budget 3D printer. It’s accurate and lacks the sloppiness typically seen in low-end 3D printers. Dual-color printing works as advertised, although you need to make sure you’re running with the right settings. On the not-so-bright side, the printing speed isn’t so great, so expect big projects to take longer than usual to be completed.

Like the da Vinci 1.0 Pro, the da Vinci Jr. 2.0 Mix features wireless connectivity, allowing you to print directly over the network. It’s less reliable compared to USB or SD card printing, but at least it eliminates the need to walk over to your printer every time you need to print. Life is too short for that. For direct control, the da Vinci Jr. 2.0 Mix includes a button-operated LCD interface at the bottom.

Now, let’s talk about the elephant in the room. Unlike the da Vinci 1.0 Pro, the da Vinci Jr. 2.0 Mix is not compatible with third-party filaments, so you’re stuck with the expensive proprietary filaments sold by XYZprinting. Furthermore, the da Vinci Jr. 2.0 Mix is limited to PLA filaments. But hey, at least the manufacturer was kind enough to include two spools of starter filaments.

If you want to level up your game and move on to multicolor 3D printing, the da Vinci Jr. 2.0 Mix is one of the best and most affordable products you can get today. It’s reliable, works with precision even in mixer/multicolor mode, includes a user-friendly software, and is easy to calibrate.

amazon

Tech Specs
Resolution: 100 microns
Volume: 5.9 x 5.9 x 5.9 in
Filament: 1.75 mm
Type: PLA
Weight: 28.7 lb
Connect: Wi-Fi, USB, SD card
The Pros
 Fully enclosed
 Easy initial hardware and software setup
 Can print in multiple colors
 Decent build volume
 Includes two spools of starter filaments
 Hassle-free bed leveling
 User-friendly default software
 Includes wireless connectivity
The Cons
 Requires expensive proprietary filament
 Limited to PLA
 Slow printing speed

9. Instone Inventor Pro

Instone Inventor ProView on Amazon

Editor’s Rating: 4.0/5

If you want a cheap 3D printer that’s hovering near $400, the Instone Inventor Pro is for you. It’s like the big brother of the Instone Easier Mini 3D Printer, both in size and in overall quality.

Like the XYZprinting da Vinci 1.0 Pro, the Inventor Pro is already assembled upon arrival, sparing beginners from the daunting task of putting together a 3D printer, which isn’t for everybody. Going through the initial setup and calibration is easy enough, although the instruction manual could’ve been better. If you run into issues during the initial setup, you can watch instructional videos on the internet.

In terms of design, the Inventor Pro is fully enclosed, making it safe to use at home and in a classroom full of curious kids. In case you want more ventilation, you can easily take off the removable top cover. At the top of the printer, you can find a small touchscreen interface. It’s responsive and easy to navigate, thanks to the straightforward options. The printer includes a set of windows on the sides, allowing you to marvel at your project while it’s being printed inside.

Built for both PLA and ABS filaments, the Inventor Pro includes a heated print bed, which is necessary for printing ABS. The build size is decent for a cheap 3D printer, so you’re not restricted to printing small items unlike other fully enclosed 3D printers available for less than $400. If you had the Instone Easier Mini 3D Printer as your starter machine, you’re in for a huge upgrade with the Inventor Pro.

The print quality is good. It’s accurate and smooth enough to even impress a few hardcore hobbyists who know a thing or two about the print quality of budget 3D printers. Just like with other 3D printers, you need to play around with the settings to get the most out of the Inventor Pro.

In general, fully enclosed 3D printers are supposed to be fairly quiet while printing, courtesy of the covers helping muffle out the sound of the printing mechanisms. Sadly, this isn’t the case with the Inventor Pro. It’s noisy, so we don’t recommend placing it in your bedroom. Though not exactly ear-splitting, the noise level is loud enough that you can make it your sort of confirmation that the printer is still working.

For connectivity, the Inventor Pro offers the full three-way support: wireless, tethered (USB), and standalone (SD card). Of the three, we found that the USB connection is the most reliable, which isn’t really surprising considering it’s a standard for most 3D printers. Forget about the Wi-Fi option. It runs into issues so often that it feels like the Inventor Pro isn’t really compatible with a wireless connection.

Overall, the Inventor Pro is a solid 3D printer that you can get without breaking your wallet, making it one of the best 3D printers under $500 for home use. It’s easy to use, comes fully assembled, and boasts a fairly large build size for a cheap 3D printer. It’s a reliable machine that you can rely on for hundreds of hours of printing, provided you’re diligent with the maintenance.

amazon

Tech Specs
Resolution: 100 microns
Volume: 9.4 x 6.3 x 6.3 in
Filament: 1.75 mm
Type: ABS, PLA
Weight: 26.5 lb
Connect: Wi-Fi, USB, SD card
The Pros
 Pre-assembled
 Fully enclosed
 Easy to use
 Includes responsive touchscreen interface
 Heated print bed
 Bed leveling is hassle-free
 Supports standalone printing via SD card
The Cons
 Unreliable Wi-Fi connection
 Non-existent online support from the manufacturer
 Instruction manual needs improvement
 Noisy while printing

10. Robo 3D R1 Plus

Robo 3D R1 PlusView on Amazon

Editor’s Rating: 4.6/5

From a distance, the Robo 3D R1 Plus looks nothing like a 3D printer. It looks more like a sewing machine than a 3D printer because of that large frame. But don’t let its unattractive physical appearance fool you – the R1 Plus is a competent machine that can easily outwork more expensive 3D printers.

The R1 Plus is an affordable 3D printer that arrives fully assembled. It’s easy to set up and configure, needing only about 30 minutes for the initial tinkering – and that’s despite the terrible documentation that it comes with. It’s backed by an active and helpful community. So ignore the instruction manual and consult directly with other experienced users in case you need immediate help during the initial setup.

Once you get it up and running properly, the R1 Plus works great. It’s straightforward to use and can work continuously for days with brilliant results. It’s accurate, works relatively fast, and permits quick removal of finished items, allowing for seamless transition between projects. It’s a bit noisy, though, so don’t even bother placing it in your room or on your work desk – unless you love hearing machines do their thing.

The R1 Plus includes a heated print bed. Combine that with the all-metal hot end and you have a budget 3D printer that has the versatility to print not just PLA and ABS but also other advanced materials. But to get consistent results with non-PLA and non-ABS materials, it’s recommended that you modify your printer, which can be a daunting task for beginners.

Unlike other cheap 3D printers, the R1 Plus boasts a large build size, which is second only to the Creality CR-10 here in our list of the best 3D printers under $500. It’s the main reason why we had a hard time bumping it down here in favor of the Monoprice Maker Select. Sure, the actual measurements are slightly off from the advertised numbers, but you still get a 3D printer that blows away most of the competition in terms of maximum build volume.

The included software is also user-friendly. It’s not the best, but it’s certainly easy to use even if you have zero experience with 3D printing software. Some consumers have remarked that the software is terrible – but it’s worth noting that such remarks were directed at the old version of the R1 Plus. It appears Robo 3D made some changes to the default software.

In summary, the R1 Plus is worth the money if you want a pre-assembled 3D printer with a large build volume. It’s got great print quality and supports standalone printing via SD card. It’s easy to use, has decent printing speed, and, most importantly for non-techies, does not need a lot of tinkering in the beginning.

amazon

Tech Specs
Resolution: 50 microns
Volume: 10 x 9 x 8 in
Filament: 1.75 mm
Type: ABS, PLA
Weight: 21 lb
Connect: USB, SD card
The Pros
 No need to assemble from scratch
 Generous build volume
 Heated print bed and all-metal hot end
 Quick removal of completed items
 Easy bed leveling
 Great print quality for a budget machine
 User-friendly default software
Posted on

Twitter to close fake, suspicious accounts – Nigerian Celebrities Worried .Genevieve Nnaji, Don Jazzy, Tonto Dikeh and many others

powered by https://huzzle.com.ng shop.i.ng   awoof  no huzzle

Twitter logo. [Photo credit: Makewebworld]
Twitter users will see a drop in their follower counts on Thursday as the company clamps down on “problematic” and “fake’’ accounts, The New York Times is reporting.Twitter will begin removing tens of millions of suspicious accounts from users’ followers signaling a major new effort to restore trust on the popular platform.
The affected accounts will include those that have been hijacked to spread abuse, misinformation and propaganda.
The online news and social networking service says users have inflated their followers on Twitter or other services with automated or fake accounts.
Also mentioned was buying the appearance of social influence to bolster political activism, business endeavors or entertainment careers.
Twitter will also remove all locked accounts from people’s follower numbers. Most people will see a change of “four followers or fewer” but accounts with larger followings will experience a “more significant drop”, the company said.

Twitter locks accounts when it detects “sudden changes in account behaviour” – for example, if the account tweets a large volume of unsolicited replies or mentions; if the account posts misleading links; or if a large number of other accounts block the account in question.

Accounts can also be locked if the platform finds that someone’s login credentials have been leaked elsewhere, for example through a data breach at another service.
In both cases, Twitter contacts the owners of the account and asks them to validate the account and reset their password. If the owner doesn’t comply, the account remains locked.
Social media enthusiasts say Twitter’s purge may affect some Nigerian “celebrities” with questionable huge following.

 It’s common knowledge that the quest for millions of followers have seen many celebrities buy fake likes and followers on Facebook, Twitter, Youtube and Instagram. The latter is the worst hit.
Nigerian celebrities, corporate organisations, small businesses and even individuals are also guilty. Experts refer to the trend as Vanity Metrics-a social media trend, which makes people feel happy about their activities on social media.
Quite a number of Nigerian celebrities are known to artificially inflate their Twitter followers to make themselves appear popular online.
Like Twitter, Facebook and Instagram routinely removes accounts to limit spam and prevent users buying followers to appear more popular.
Many celebrities were affected by an Instagram purge in 2015. The affected stars included Genevieve Nnaji, Don Jazzy, Tonto Dikeh and many others

Posted on

Amazon GO is opening more cashierless stores, more people are quitting their jobs, and more top news

Amazon Go branding is visible through a gap at the top of window coverings, unofficially revealing the company’s new cashier-less store location in downtown Seattle. (GeekWire photo / Taylor Soper)

Amazon is expanding its checkout-free Amazon Go retail concept with another location in the company’s backyard, GeekWire has learned.

The store, the second in Amazon’s hometown of Seattle, will be located in the new Madison Centre office tower at the corner of Fifth Avenue and Marion Street. The first store debuted one mile away at the base of Amazon’s Day One tower in January, after more than a year of fine-tuning the concept.

Amazon confirmed the new store in a statement, saying “We are excited to bring Amazon Go to 920 5th Avenue in Seattle. The store will open in Fall 2018.”

A GeekWire reader first spotted hints of the new Amazon Go in downtown Seattle. We found a permit filing for an “Amazon retail” project at the site and peeked through small gaps in the window covering from the sidewalk to confirm that the company is indeed gearing up to open another high-tech convenience store at the location.

But the biggest clue is visible from across the street at night. A convenient gap at the top of the window covering shows the signature Amazon Go slogan, “No lines. No checkout. (No, seriously.)”

Amazon is opening an Amazon Go location at the new Madison Centre office tower at the corner of Fifth Avenue and Marion Street in downtown Seattle.

Peering through the window from the sidewalk, GeekWire also spotted rows of sandwiches, bottles of Smartwater and Peligrino, and the entry-exit scanning gates to the store.

According to permit filings with the city of Seattle, the store is larger than the original version — approximately 3,000 square feet, versus 1,800 square feet. It’s on the first floor of the Madison Centre, a 36-story high-rise that opened late last year across from Seattle Central Library and houses law firm Davis Wright Tremaine and Seattle startup Textio.

Opening day at the first Amazon Go retail store in Seattle. (GeekWire Photo / Todd Bishop)

Not long after the company announced the new retail concept, rumblings about expansion in Seattle started to surface. Permitting activity has long pointed to an expansion in Seattle’s trendy Capitol Hill neighborhood, though development at that site hasn’t progressed much since these reports began to surface.

The company has since confirmed that it’s expanding Amazon Go to San Francisco and Chicago. Earlier this year, Recode reported that Amazon plans to open as many as six additional Amazon Go stores beyond the original Seattle location.

The Amazon Go slogan is visible at the company’s original location on its campus in South Lake Union. (GeekWire Photo / Kevin Lisota)

Amazon first announced Amazon Go in 2016, stunning the retail world with the promise of stores without checkout lines or cashiers. After setting a goal of opening the store in early 2017, the first location didn’t debut to the public — it was previously accessible to employees only — until a year later. Reports surfaced that Amazon was having trouble with the technology behind the store, though company officials insisted that wasn’t the case.

The store relies heavily on the Amazon Go smartphone app. Customers scan a unique QR code within the app before passing through a set of glass doors, similar to the gates Amazon employees go through when entering their office buildings every morning. A vast array of overhead cameras and weight sensors in the shelves automatically track what people pick up and take from the store.

When customers leave, they just walk out. Amazon Go’s systems automatically debit their accounts for the items they take, sending the receipt to the app. By logging shoppers in at the entrance, then tracking their actions in the store, the system eliminates the need for traditional checkout registers and checkout workers along with them.

Amazon Go drew giant lines when it opened in Seattle earlier this year. The store has a 4.5-star rating on Yelp, with customers raving about the concept.

Amazon Go is part of a broader push by Amazon into physical retail, including its acquisition of Whole Foods, its Amazon Books stores, and AmazonFresh Pickup locations.

Posted on

Dubai billionaire to take on Amazon and his extreme work ethic for his staff

A RUTHLESS billionaire has vowed to take on Amazon with his own e-commerce company — and to get to the top he has set extreme expectations for his staff.

Staff writers
News Corp Australia NetworkJANUARY 2, 20184:44PM

Mohamed Alabbar, pictured centre, has created what he calls a viable competitor to Amazon and other global e-commerce giants with his $1 billion start-up Noon. Photo: Associated PressSource:AP

A DUBAI billionaire is vowing to take on Amazon with his emerging e-commerce empire — and to get to the top he has some extreme working conditions for his staff.

Mohamed Alabbar, 60, a real-estate tycoon, wanted to create a viable competitor to US tech giant Amazon.com, so launched his $1 billion e-commerce firm Noon in September last year.

But to beat the best you’ve got to be the best, and for Mr Alabbar, that involves his staff working under ruthless rules.

Mohamed Alabbar wants his e-commerce company to be on the same level as Amazon. Photo: AFP

Mohamed Alabbar wants his e-commerce company to be on the same level as Amazon. Photo: AFPSource:AFP

Ads by Kiosked

“I want people who sleep in the office,” Mr Alabbar told The Wall Street Journal.

“Want to go walk your dog in the afternoon and all that? I’m not the guy you work for.”

Noon, which is based in the Middle East, offers millions of products ranging from fashion to electronics and is, for the time being, available only to Middle Eastern households.

The UAE is only now scratching the surface of an e-commerce boom as people in the region become increasingly tech-savvy and household incomes increase.

Earlier this year, Amazon acquired Dubai-based online retailer Souq.com for $579 million and has already expanded its products and is upgrading its technology systems.

But Mr Alabbar believes he has the local’s advantage.

Amazon, which launched in Australia at the end of last year, is the world’s largest internet company by revenue.

Amazon, which launched in Australia at the end of last year, is the world’s largest internet company by revenue.Source:Supplied

Ads by Kiosked

“This is my region, and we want to have a part in it,” he said.

Six months before the Amazon takeover, Mr Alabbar had announced his plans to start Noon.

Half of the $1 billion seed money came from Saudi Arabia’s Public Investment Fund and the rest from a group of Gulf investors.

The deal made Noon one of the most expensive tech ventures in the region.

E-commerce currently contributes less than 0.5 per cent to the UAE economy, compared with 2 per cent to 3 per cent in more mature markets.

But A.T. Kearney consulting firm principal Adel Belcaid said it was only a matter of time before it exploded.

“The Middle East is an untapped opportunity for e-commerce, ripe for the taking,” he said.

Aside from Noon, Mr Alabbar runs his firm Emaar Properties, which built the world’s tallest tower, the Burj Khalifa, as well as the glitzy landmark Dubai Mall and other famous buildings in the city.

Posted on

Jessica Alba – She is not Even Black And Did you know She is One of the Richest Women in Entertainment !

100,000 Fans Google Jessica Alba’s Ethnicity, Nationality & Parents Race Heritage

 

Image result for jessica alba net worth

 

The company is now said to be worth $1.7 billion, and Forbes has named Alba one of America’s richest entrepreneurs under 40. As of April 2017 she had a net worth of $350 million, according to Celebrity Net Worth.Apr 26, 2017

IF RACE NO LONGER matters today, why do so many fans want to know about the ethnicity, nationality and family background of actress Jessica Alba?

hollywood-actress-jessica-alba-ethnicity-nationality-race-heritage-photo-picture

 

 

MILLIONS OF FANS around the globe watch Hollywood actress Jessica Alba on television or on their mobile devices, and they wonder — is she Italian, Spanish, Mexican, mixed race? With her olive skin, dark hair and eyes she looks like she could be all of these, such is the aesthetic complexity of modern beauty. Inevitably, those of Alba’s fans with questions about her ethnicity, nationality and her parents’ race heritage turn to the oracle that is Google for answers. Each month the search giant records the total number of Internet queries that their users type into their browsers. For example, 3,000 Jessica Alba fans Google the term, “Jessica Alba ethnicity”, each month, while a further 2,000 search, “Jessica Alba parents”. Meanwhile, 700 people ask, “Is Jessica Alba black?”

JESSICA ALBA ETHNICITY & NATIONALITY: THE FACTS 

If we add up the total number of search queries about Alba’s ethnicity, nationality and family background, it amounts to approximately 100,000 searches per year.

So, what are the facts about Jessica’s ethnicity and race heritage? She was born in Pomona, Southern California on April 28, 1981. Her parents are Mark David Alba, an ex-US Air Force serviceman of Mexican and Spanish ancestry, and Catherine Jensen, who is of English, Danish, Welsh, German and French heritage.

RACE HERITAGE ACCUSATION

In Jessica’s early career she was dogged by allegations that she was in denial of her heritage. In February 2008, when she appeared on the cover of the March edition of Latina magazine, many voices within the Latin community were shocked, as they were convinced that she was ashamed of her Mexican ancestry. The Internet was awash with false quotes attributed to the actress — “My grandfather tried to forget his Mexican roots”, was one of them, and, “As a third-generation American, I feel as if I finally cut loose,” was another. Blogger Perez Hilton went as far as to nickname her Jessica “Don’t Call Me Latina” Alba. In response to the haters and the false quotes the magazine offered Alba the opportunity to address them in an interview once and for all. “It really hurts my family when they read stuff like that,” she said. “They really hate it. I always tell them I’m sorry, that it’s just the nature of what I do. People will say things that aren’t true and I can’t really do anything about it.”

ALBA’S DNA ETHNICITY TEST

Since then Alba has made a point about openly embracing her ethnicity and her family’s race heritage. In 2011 she appeared on the talk show Lopez Tonight, where they exclusively revealed the results of her ancestry DNA test. To her surprise they revealed that she was 87 per cent European and 13 per cent Native American. “Wow, that’s crazy,” she said. “I can’t believe it.”

Then in November 2014, she appeared on the popular ancestry DNA testing TV show Finding Your Roots, with Henry Louis Gates Jr., which traced her family background all the way back to the ancient Mayan civilisation of eastern Mesoamerica, discovering some Sephardic Jewish ancestry on her father’s side along the way. However, their DNA genealogy test results differed from those stated on Lopez Tonight. The show described Alba as being of 72.7% European, 22.5% Native, 2% Sub-Saharan African, 0.3% Middle Eastern/North African, and 0.1% South Asian, ancestry, with an additional 2.4% for which there was no match.

Ben Arogundade’s book ‘Black Beauty’ is out now.

BEAUTY UNDEFINED: Many fans are curious about Jessica Alba’s ethnicity, nationality and family background. Is she Hispanic, black, bi-racial?

JESSICA’S WORLD: (From the top): Hollywood actress Jessica Alba as a young girl visits Santa Claus with her brother Josh; Alba’s parents – her father Mark is of Mexican and Spanish ancestry, and her mother Catherine, is of English, Danish, Welsh, German and French extraction; Jessica appeared on the cover of the March 2008 edition of ‘Latina’, after a series of lies that she was in denial of her heritage appeared on the Internet. Alba graces the cover of the August 2014 edition GQ magazine.

 

 

*JESSICA ALBA’S ETHNICITY, NATIONALITY, RACE, ACCORDING TO GOOGLE SEARCH

700

The number of people worldwide who Google the question, “Is Jessica Alba black?” each month.

2,000

The number of people worldwide who Google the phrase, “Jessica Alba parents” each month.

3,000

The number of people worldwide who Google the phrase “Jessica Alba ethnicity” each month.

All figures for “Jessica Alba Ethnicity, Nationality, Race According to Google Search”, supplied by Google. Stats include global totals for laptop and desktop computers and mobile devices.

Posted on

Wizkid vs Sickle Cell Anaemia: The Concert and The Lady He met on a Plane Just Amazing !

Yes oo flew life with WIZ KID.wizkidyetty

His seat no was 1 while my seat no was 3.

We talked about sickle cell disease, apparently his elder sis is a sickler and cos of his his sister and me he has decided to have a show for me next year in lagos and he will play for free on behalf of sickle cell disease.

My connection tight,

Watch out for this space next year when myself and wiz kid take sickle cell disease awareness to another level.

Yes I Can
Ooops Yes I did it again.

We are having lunch together with my husband this weekend to talk about the project.

Sorry I can’t keep calm.

Wiz kid is now on my speed dial.

SICKLE CELL DISEASE AWARENESS IS GOING BIG IN NIGERIA THANKS TO DRAMA QUEEN .

mic dropped.

From benin
To lagos
To London
Now round the world. That is my OJUELEGBA

 

https://m.facebook.com/story.php?story_fbid=10155483419865779&id=724155778&_rdr

 

Image may contain: 1 person, indoor

WELCOME TO HUZZLE SHOPS ! New York London Rio Lagos Joburg Stockholm .PAY WITH PAYPAL FOR PEACE OF MIND ! www.huzzle.us Dismiss